3. Connections
Pin connections of the power plug
Image 3-2
View from projector side.
How to connect ?
1. Plug the female connector of the power cord into the corresponding male connector on the projector.
Caution:
Power Cord: the cross-sectional area of the conductor in the power supply cord shall be not less than 4 mm
AWG 10.
2. Put the voltage selection switch in the correct position.
Switch position
Upper left
Lower left
3. Put the male connector of the power cable into the wall outlet.
24
Description
3 x 208V
3 x 400V
R5976690 XLM H25 25/05/2009
or
2