Table of Contents
Advertisement
8. Service
8.10 Convergence
How to adjust
1. Push the cursor key ↑ or ↓ to highlight Convergence. (menu 8-28)
2. Press ENTER to select.
A convergence pattern will be displayed.
For more information on how to adjust the convergence physically, consult the service and maintenance documents.
3. Press ENTER to switch to other patterns.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-28
8.11 Reset hardware
What can be done ?
The formatter hardware and the inputs are hardware reset. That means that the formatter board is powered off and on again even
as the 3 modular formatters R G B.
To reset the inputs, the complete ACSAR is power off and on again.
The current settings are reloaded after a reset.
How to reset
1. Push the cursor key ↑ or ↓ to highlight Reset hardware. (menu 8-29)
2. Press ENTER to select.
The Reset hardware menu will be displayed. (menu 8-30)
3. To reset the formatters, push the cursor key ↑ or ↓ to highlight Reset Formatters and press ENTER to start the reset.
This reset process can take a while. It starts with a black screen, goes to red, then green, followed by blue to end with full color.
4. To reset the inputs, push the cursor key ↑ or ↓ to highlight Reset Inputs
The complete input unit is reset.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-29
8.12 Factory defaults
What can be done?
All settings of the projector will be set to the original factory settings. All user settings are deleted with this operation.
112
RESET HARDWARE
RESET FORMATTERS
RESET INPUTS
Select with ↑ or ↓
<ENTER> to start reset
<EXIT> to return
Menu 8-30
R5976690 XLM H25 25/05/2009
Advertisement
Table of Contents
