Diagnosis; Start Up; Errors - Barco R9010100 Owner's Manual

The Ethernet communication can be lost since the projector's IP address will be reset to a default IP address
and the DHCP option is set to OFF.
How to return to the default settings
1. Push the cursor key ↑ or ↓ to highlight Factory defaults. (menu 8-31)
2. Press ENTER to select.
The Factory defaults confirmation menu is displayed. (menu 8-32)
3. Press ENTER to confirm the reset to the factory defaults.
Press EXIT to return without reset to factory defaults.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS

DIAGNOSIS

Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-31
8.13 Diagnosis
Overview
•

Start up

•

Errors

• Voltages
• Temperatures
• Fan speeds
• Versions
8.13.1 Start up
How to start up
1. Push the cursor key ↑ or ↓ to highlight Diagnosis. (menu 8-33)
2. Press ENTER to select.
The Diagnosis menu will be displayed. (menu 8-34)
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-33
8.13.2 Errors
How to display errors
1. Push the cursor key ↑ or ↓ to highlight Errors. (menu 8-35)
R5976690 XLM H25 25/05/2009
FACTORY DEFAULTS
RESET TO FACTORY DEFAULTS?
<ENTER> to confirm
<EXIT> to return
Menu 8-32
DIAGNOSIS
ERRORS
VOLTAGES
TEMPERATURES
FAN SPEEDS
VERSIONS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-34
8. Service
113