File Service; Possible File Manipulations; Start Up - Barco R9010100 Owner's Manual

6. Adjustment Mode
The adjustment mode menu will be displayed. (menu 6-2)
MAIN
Select a path from
below :
ADJUSTMENT MODE
INSTALLATION
SERVICE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-1
6.3

File Service

Overview
• Possible file manipulations
•

Start up

• Load file
• Edit file
• Rename
• Copy
• Delete
• File Options
6.3.1 Possible file manipulations
Connecting a new source.
Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most
used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When
there is a little difference, the file can also be loaded and then edited until the source specs are reached.
Possible file Manipulations
The following file manipulations are possible :
• Load : installation of a file for a new source.
• Edit : editing a loaded file to the source specs.
• Rename : renaming a file.
• Copy : copying a file.
• Delete : deleting a file
• Options : manual / automatic
File attributes
Each file can have a 'read' or 'read-write' attribute.
The following situation can be found on the menus:
• r— : file is read only.
• rw- : file has a read-write attribute and can be edited.
6.3.2 Start up
Start up
To enter the File Service, handle as follow :
1. Push the cursor key ↑ or ↓ to highlight File Service. (menu 6-3)
2. Press ENTER to select.
50
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
WINDOW ADJUSTMENT
LAYOUT ADJUSTMENT
SCENERGIX
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-2
R5976690 XLM H25 25/05/2009