Macros; Run A Macro - Barco R9010100 Owner's Manual

The selected macro will be associated with the previous selected button.
INSTALLATION
INPUT SLOTS
CONFIGURATION
LENS
TILT
INTERNAL PATTERNS
QUICK ACCESS KEYS
BUTTONS

MACROS

OSD
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 7-34
When standby button is selected
When the standby symbol is selected, the standby button menu appears.
BUTTON STANDBY
[ ] LAMP ONLY (MACRO "Lamp")
Toggle between lamp on
and lamp off.
All other parts remained
full powered
[x] LAMP + POWER (MACRO
"Standby")
Toggle between lamp on
and lamp off.
If the lamp is off the
projector
goes into low power mode.
<ENTER> to select
<EXIT> to return
Menu 7-37
The standby button can act now as:
• lamp on/off button when the first option is checked.
• lamp + power on/off when the second option is checked.
7.9 Macros
What is possible ?
A macro can be created, renamed, copied and started. The created macro file can then be associated with a button on the remote
control.
Overview
•

Run a macro

• Edit a Macro
• Rename a macro file
• Copy a macro file
• Delete a macro file
• Create a macro file
7.9.1 Run a macro
What can be done ?
A macro can be started with the Run function.
How to run ?
1. Push the cursor key ↑ or ↓ to highlight Macros. (menu 7-38)
2. Press ENTER to select.
The Macro menu will be displayed. (menu 7-39)
3. Push the cursor key ↑ or ↓ to highlight Run.
4. Press ENTER to select.
The Run macro menu will be displayed. (menu 7-40)
R5976690 XLM H25 25/05/2009
BUTTONS
Button Macro name
1 Input 1
2 Input 2
3 Input 3
4 Input 4
5 Input 1234
6 Hatch
___________________
Select with ↑ or ↓
<ENTER> to select
<EXIT> to return
Menu 7-35
CHANGE BUTTON
Macro name
Input 2
Input 3
Lamp
Power
Lens
Select with ↑ or ↓
<ENTER> to select
<EXIT> to return
Menu 7-36
7. Installation
97