Table of Contents
Advertisement
2. Press ENTER to select.
The Color Space selection menu will be displayed. (menu 6-29)
The actual selected color space is indicated next to Active and an '*' is placed before the item in the list.
3. Push the cursor key ↑ or ↓ to highlight Custom.
The Edit color space menu opens. (menu 6-30)
4. Push the cursor key ↑ or ↓ to highlight one of the primary or secondary colors which must be changed and press ENTER.
5. Use the cursor keys to change the value or enter a new value with the digit keys.
PICTURE TUNING
COLOR SPACE
COLOR TEMPERATURE
GAMMA
NOISE REDUCTION
INPUT BALANCE
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 6-28
Note that it is common practice to set the targets outside the projector color space. This implies there would
be clipping if a fully saturated input was applied. In normal scenes, this does not happen, and the extra gain
or saturation helps balance the overall lock. If clipping occurs, there will typically be a hue shift when one of
R, G, B goes into clip ahead of the others.
6.4.3
Color Temperature
It is possible that when P7 is activated and the color temperature has been changed, the screen is all black
(no picture, no OSD). This can happen, due to the fact that for every change in color space setting the color
temperature also has to be set (that has to be done on the LCD as the OSD has disappeared).
6.4.3.1
Color Temperature selection
What can be done ?
The color temperature can be selected according to the type of source.
There are 3 different preset color temperatures, 3200 K, 6500 K and 9300 K. These calibrated presets can be selected and will
provide optimum color tracking. The projector however allows the setting of a personal color temperature in custom or to choose for
Projector white.
Projector white
Native white of the projector (non calibrated white).
How to select ?
1. Push the cursor key ↑ or ↓ to highlight Color Temperature. (menu 6-31)
2. Press ENTER to select.
The Color Temperature selection menu will be displayed. (menu 6-32)
The actual selected color temperature is indicated next to Active and an '*' is placed before the item in the list.
3. Push the cursor key ↑ or ↓ to highlight the desired value.
4. Press ENTER to select.
R5976690 XLM H25 25/05/2009
COLOR SPACE
Color space name
Attr
Custom
rw-
*EBU
r--
Projector
r--
SMPTE
r--
___________________________
Active: EBU
Select with ↑ or ↓
<ENTER> to adjust,
→ to edit/view
<EXIT> to return
Menu 6-29
EDIT COLOR SPACE
Primaries:
RED X
0.6400
RED Y
0.3300
GREEN X
0.2900
GREEN Y
0.6000
BLUE X
0.1500
BLUE Y
0.0600
Secondaries
MAGENTA X 0.0000
MAGENTA Y 0.0000
CYAN X
0.0000
CYAN Y
0.0000
YELLOW X
0.0000
YELLOW Y
0.0000
↑, ↓, ←, →, <ENTER>, <EXIT>
Menu 6-30
6. Adjustment Mode
59
Advertisement
Table of Contents
