Change Projector Address - Common Address - Barco R9010100 Owner's Manual

8. Service
• Projector run time : total time the projector is running since its first start up.
• Customer id : user defined string of maximum 16 characters to identify its projector.
Start up
1. Push the cursor key ↑ or ↓ to highlight Identification. (menu 8-3)
2. Press ENTER to select.
The Identification screen will be displayed. (menu 8-4)
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-3
8.3 Change Projector Address – Common Address
How to change projector address ?
1. Push the cursor key ↑ or ↓ to highlight Change projector address. (menu 8-5)
2. Press ENTER to select.
The Change Projector Address menu will be displayed and the actual address will be filled out. (menu 8-6)
3. Push the cursor key ↑ or ↓ to highlight Projector address.
4. Press ENTER to select.
The digit will be highlighted.
5. Reprogram with ↑,↓,←,→ until the desired value is reached.
Or,
enter the digits directly with the numeric keys.
SERVICE
IDENTIFICATION
CHANGE PROJECTOR ADDRESS
CHANGE CUSTOMER ID
COMMUNICATION
DATE AND TIME
LAMP
DIMMING/CLO
CONVERGENCE
THOMSON WORLDCAM MODE [OFF]
RESET HARDWARE
FACTORY DEFAULTS
DIAGNOSIS
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-5
How to change the common address ?
1. Push the cursor key ↑ or ↓ to highlight Change projector address. (menu 8-7)
2. Press ENTER to select.
The Change Projector Address menu will be displayed and the actual address will be filled out. (menu 8-8)
3. Push the cursor key ↑ or ↓ to highlight Common address.
4. Press ENTER to select.
The digit will be highlighted.
5. Reprogram with ↑,↓,←,→ until the desired value is reached.
104
XLM H25
PROJ. ADDRESS : 1
SOFT. VERSION : 1.0.3
CONFIG: front/
ceiling
BAUDRATE PC: 9600
IP : 192.168.100.003
TEXT : on
SERIAL NO.: 1012000
RUNTIME: 150h
CUSTOMER ID : NAME
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-4
CHANGE PROJ. ADDRESS
PROJECTOR ADDRESS 1
COMMON ADDRESS 0
Select with ↑ or ↓
Reprogram with ←,→
<ENTER> to confirm
<EXIT> to return
Menu 8-6
R5976690 XLM H25 25/05/2009