13. Input
13.8 No Signal
Overview
•
Background color
•
Background Logo
•
Shutdown settings
•
Shutdown retarding time
•
Auto Dimming
What can happen when no signal
When no signal is available at the selected input, the output can be set to blue or black or a personal defined logo can be displayed
or the projector can shutdown after a certain time or auto dimming can be started.
13.8.1 Background color
How to set the background color
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → No Signal. → Color.
2. Press ENTER to toggle between [Blue] or [black].
Image 13-17
No signal, color
13.8.2 Background Logo
What can be done ?
A logo can be switched on or off.
When logo is switched on and a logo is available, that logo will be displayed when no signal is available for the main window an no
signal available for the PiP window in case PiP is On.
How to activate logo
1. Press Menu on the remote control (RCU) or on the local keypad to activate the menus and select Input → No Signal. → Logo.
2. Press ENTER to toggle between [On] or [Off].
Image 13-18
No signal, logo
A dedicated logo can be loaded via Projector Toolset with a HDF WLP series plug-in installed.
118
R5906730 HDF WLP SERIES 01/08/2017