Ppm; Ppn; Ppt; Ppx - AMX Modero NXD-500i Operation/Reference Manual

5" modero wall/flush mount touch panel with intercom
Hide thumbs Also See for Modero NXD-500i:
Table of Contents

Advertisement

Programming
Page Commands (Cont.)
@PPM Set the modality of a specific popup page to Modal or NonModal.
A Modal popup page, when active, only allows use of the buttons and features on that popup page. All
other buttons on the panel page are inactivated.
Syntax:
Variables:
Example:
Sets the popup page 'Popup1' to Modal.
Sets the popup page 'Popup1' to Modal.
@PPN Activate a specific popup page to launch on either a specified page or the current page.
• If the page name is empty, the current page is used (see example 2).
• If the popup page is already on, do not re-draw it.
• This command works in the same way as the 'Show Popup' command in TPDesign4.
Syntax:
Variable:
Example:
Activates 'Popup1' on the 'Main' page.
Example 2:
Activates the popup page 'Popup1' on the current page.

@PPT

Set a specific popup page to timeout within a specified time.
If timeout is empty, the popup page will clear the timeout.
Syntax:
Variable:
Example:
Sets the popup page 'Popup1' to timeout within 3 seconds.
@PPX Close all popups on all pages.
This command works in the same way as the 'Clear All' command in TPDesign 4.
Syntax:
Example:
Close all popups on all pages.
76
"'@PPM-<popup page name>;<mode>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
mode = NONMODAL converts a previously Modal popup page to a NonModal.
MODAL converts a previously NonModal popup page to Modal.
modal = 1 and non-modal = 0
SEND_COMMAND Panel,"'@PPM-Popup1;Modal'"
SEND_COMMAND Panel,"'@PPM-Popup1;1'"
"'@PPN-<popup page name>;<page name>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
SEND_COMMAND Panel,"'@PPN-Popup1;Main'"
SEND_COMMAND Panel,"'@PPN-Popup1'"
"'@PPT-<popup page name>;<timeout>'"
popup page name = 1 - 50 ASCII characters. Name of the popup page.
timeout = Timeout duration in 1/10ths of a second.
SEND_COMMAND Panel,"'@PPT-Popup1;30'"

"'@PPX'"

SEND_COMMAND Panel,"'@PPX'"
NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom

Advertisement

Table of Contents
loading

Table of Contents