Gru; Gsc; Gsn - AMX Modero NXD-500i Operation/Reference Manual

"^" Button Commands (Cont.)

^GRU

^GSC

^GSN

NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom
Change the bargraph ramp-up time in 1/10th of a second.
Syntax:
"'^GRU-<vt addr range>,<bargraph ramp up time>'"
Variable:
variable text address range = 1 - 4000.
bargraph ramp up time = In 1/10th of a second intervals.
Example:
SEND_COMMAND Panel,"'^GRU-500,100'"
Changes the bargraph ramp up time to 10 seconds.
Change the bargraph slider color or joystick cursor color.
Note: Colors can be set by Color Numbers, Color name, R,G,B,alpha colors (RRGGBBAA)
and R, G & B colors values (RRGGBB). Refer to the RGB Values for all 88 Basic
Colors table on page 79.
Syntax:
"'^GSC-<vt addr range>,<color value>'"
Variable:
variable text address range = 1 - 4000.
color value = Refer to the RGB Values for all 88 Basic Colors table on page 79.
Example:
SEND_COMMAND Panel,"'^GSC-500,12'"
Changes the bargraph or joystick slider color to Yellow.
Change the bargraph slider name or joystick cursor name. Slider names and cursor
names can be found in the TPDesign4 slider name and cursor drop-down list.
Syntax:
"'^GSN-<vt addr range>,<bargraph slider name>'"
Variable:
variable text address range = 1 - 4000.
bargraph slider name = See table below.
Bargraph Slider Names:
None Ball
Circle -S
Circle -M
Rectangle -L Rectangle -M
Windows
Windows Active
Joystick Cursor Names:
None
Circle
Hand
Target
Example:
SEND_COMMAND Panel,"'^GSN-500,Ball'"
Changes the bargraph slider name or the Joystick cursor name to 'Ball'.
Circle -L
Precision
Rectangle -S
Arrow Ball
Crosshairs Gunsight
Metal Spiral
View Finder
Programming
97