AMX Modero NXD-500i Operation/Reference Manual page 15

Product Specifications (Cont.)
Side Panel Components:
• Ethernet 10/100 port:
• Mini-USB connector:
Button Assignments:
Weight:
Certifications:
Operating / Storage
Environment:
Included Accessories:
Other AMX Equipment:
NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom
• RJ-45 port for 10/100 Mbps communication. The Ethernet port automatically
negotiates the connection speed (10 Mbps or 100 Mbps), and whether to use
half duplex or full duplex mode. Power is supplied through Power Over
Ethernet (PoE)
• NXD-500i panels communicate with the NetLinx Master using the ICSP
protocol over Ethernet.
• LEDs show communication activity, connections, speeds, and mode
information:
L/A-link/activity - yellow LED lights On when the Ethernet cables are
connected and terminated correctly and then blinks when receiving Ethernet
data packets.
SPD-speed - Green LED lights On when the connection speed is 100 Mbps
and turns Off when the speed is 10 Mbps.
5-pin Mini-USB connector used for programming, firmware update, and touch
panel file transfer between the PC and the target panel. The connector is also
used for providing audio output for external speakers.
The mini-USB port automatically detects the presence of a headphone
adaptor, allowing the port to be used for headphone connectivity.
Note: When connecting the panel to PC using a CC-USB (or compatible)
cable, be sure to power the panel On before attempting to connect the USB
cable from the PC to the mini-USB port on the panel. Refer to the Configuring
and Using USB with a Virtual Master section on page 25 for more information.
Button assignments can only be adjusted in TPD4 and not on the panel.
• Button channel range: 1 - 4000 button push and feedback (per address port)
• Button variable text range: 1 - 4000 (per address port)
• Button states range: 1 - 256 (General Button; 1 = Off State, 2 = On State)
• Level range: 1 - 600 (default level value 0-255, can be set up to 1-65535)
• Address port range: 1 - 100
• 0.80 lbs (0.36 kg)
• FCC Part 15 Class B
• CE
• IEC 60950
• RoHS
• Operating Temperature: 0° C (32° F) to 40° C (104° F)
• Operating Humidity: 5% - 85% relative humidity (non-condensing)
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% - 85% RH
• NXD-500i Installation Guide (93-2261-02)
• Front Bezel (60-2261-11)
• NXA-BEZ500 Mystique Style Bezel Kit (FG2261-48)
• NXA-BEZP-500 Portrait Bezel Kit (FG2261-10/11)
• CB-TP5i Rough-In/Wallbox (FG038-11)
• CB-TP5ib Back Cover for CB-TP5i Rough-In/Wallbox (FG038-12)
• NXA-TTS500 Table Top Stand (FG2261-40)
• PS-POE-AF PoE Injector (FG423-80)
• CC-USB Type-A to Mini-B 5-wire programming cable (FG10-5965)
• USB to Headphone Adaptor (FG5966-23)
• NXA-RK5 Rack Mount Kit for 5" Wall Mount panels (FG2904-55):
- 5" Rackmount
- Four Screws, #10-32 x.625, PH Truss, BLK
- Four Washers, #10, Black Nylon
- Three Screws, #4-40 x.250, PPH, BLK
Introduction
3