Phn-Answer; Phn-Autoanswer; Phn-Call; Phn-Dtmf - AMX Modero NXD-500i Operation/Reference Manual

Programming
The following table lists and describes SIP commands that are sent to the touch panel to manage calls.
SIP Commands

^PHN-ANSWER

^PHN-AUTOANSWER Enables (1) or disables (0) the auto-answer feature on the phone.
?PHN-AUTOANSWER Queries the state of the auto-answer feature.

^PHN-CALL

^PHN-DTMF

^PHN-HANGUP

^PHN-HOLD

126
Answers the call.
Syntax:
"'^PHN-ANSWER, <connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-ANSWER, 1'"
Syntax:
"'^PHN-AUTOANSWER, <state>'"
Variable:
state = 0 (Disable) or 1 (Enable)
Example:
SEND_COMMAND Panel,"'^PHN-AUTOANSWER, 1'"
Enables the auto-answer feature.
The panel responds with the ^PHN-AUTOANSWER, <state> message.
Syntax:

"'?PHN-AUTOANSWER'"

Example:
SEND_COMMAND Panel,"'?PHN-AUTOANSWER'"
Calls the provided number.
Syntax:
"'^PHN-CALL, <number>'"
Variable:
number = The provided phone number
Example:
SEND_COMMAND Panel,"'^PHN-CALL, 2125551000'"
Sends DTMF codes.
Syntax:
"'^PHN-DTMF, <DTMF code>'"
Variable:
DTMF code = 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, POUND, or ASTERISK.
Example:
SEND_COMMAND Panel,"'^PHN-DTMF, 1234567879ASTERISK'"
Hangs up the call.
Syntax:
"'^PHN-HANGUP, <connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-HANGUP, 1'"
Places the call on hold.
Syntax:
"'^PHN-HOLD, <connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-HOLD, 1'"
NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom