Introduction; Key Features - AMX Modero NXD-500i Operation/Reference Manual

Introduction

The NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom (FG2261-02) is a widescreen full-
color mini-touch panel with full sound and intercom capability. This panel includes a built-in microphone,
speakers, a mini-USB port for programming and audio output, and one NetLinx-programmable button.
The NXD-500i supports Intercom functionality, which allows two communicating panels (controlled by the
NetLinx Master) to transmit full-duplex audio signals over a network in order for it to be used as an Intercom
system.
Button trim ring
Touch screen
FIG. 1 NXD-500i Wall/Flush Mount Touch Panel - Schematics

Key Features








NXD-500i 5" Wall/Flush Mount Touch Panel with Intercom
Speaker
Front Bezel button
Support of AMX's 4th generation (G4) graphics which provide higher brightness, richer colors, and
deeper contrast. The new G4 graphics technology is supported by the TPDesign4 Touch Panel
Design application, available for download from www.amx.com.
Display of images on a large 16:9 image format, while providing a wide 90-degree top-to-bottom
viewing angle.
A front panel light sensor, motion sensor, IR receiver and a Sleep/Setup Access button.
Utilization of the Voice Over Internet protocol (VoIP), which allows telephone calls to be made or
received directly from the touch panel.
Support of AMX Computer Control, which enables remote viewing and control of any networked
computer directly from the panel. This gives the user the ability to launch digital music from a PC,
cruise the Internet, check and respond to E-mail, open software files, and launch applications.
Anything you can do on your PC can be accomplished through these panels.
Programmable firmware that can be upgraded via the mini-USB port in the back of the device.
Same perimeter footprint as the NXD-CV5, but with a shallower mounting depth.
Introduction
Locking tabs
Back box
1