Phn-Answer; Phn-Autoanswer; Phn-Msgwaiting; Phn-Privacy - AMX NXD-500i Operation/Reference Manual
5" modero wall/flush mount touch panel with intercom
Hide thumbs
Also See for NXD-500i:
- Operation/reference manual (154 pages) ,
- Installation manual (2 pages) ,
- Dimension manual (1 page)
Table of Contents
Advertisement
Programming
SIP Commands (Cont.)
^PHN-MSGWAITING
^PHN-PRIVACY
^PHN-REDIAL
^PHN-TRANSFERRED Indicates a call has been transferred.
The following table lists and describes SIP commands that are sent to the touch panel to manage calls.
SIP Commands
^PHN-ANSWER
^PHN-AUTOANSWER Enables (1) or disables (0) the auto-answer feature on the phone.
114
Indicates the number of messages waiting the user's voice mail box.
Syntax:
"'^PHN-MSGWAITING, <messages>, <new message count>, <old message count>, <new
urgent message count>, <old urgent message count>'"
Variables:
messages = 0 or 1 (1 indicates new messages)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
Example:
SEND_COMMAND Panel,"'^PHN-MSGWAITING, 1, 1, 2, 1, 0'"
Indicates the state of the privacy feature.
Syntax:
"'^PHN-PRIVACY, <state>'"
Variable:
state = 0 (Disable) or 1 (Enable)
new message count = The number of new messages.
old message count = The number of old messages.
new urgent message count = The number of new messages marked urgent.
old urgent message count = The number of old messages marked urgent.
Example:
SEND_COMMAND Panel,"'^PHN-PRIVACY, 0'"
Indicates the panel is redialing the number.
Syntax:
"'^PHN-REDIAL, <number>'"
Variable:
number = The phone number to dial.
Example:
SEND_COMMAND Panel,"'^PHN-REDIAL, 2125551000'"
Syntax:
"'^PHN-TRANSFERRED'"
Example:
SEND_COMMAND Panel,"'^PHN-TRANSFERRED'"
Answers the call.
Syntax:
"'^PHN-ANSWER, <connection id>'"
Variable:
connection id = The identifying number of the connection
Example:
SEND_COMMAND Panel,"'^PHN-ANSWER, 1'"
Syntax:
"'^PHN-AUTOANSWER, <state>'"
Variable:
state = 0 (Disable) or 1 (Enable)
Example:
SEND_COMMAND Panel,"'^PHN-AUTOANSWER, 1'"
Enables the auto-answer feature.
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom
Advertisement
Table of Contents
