•
Statics Key Settings specify up to four static WEP encryption keys that clients may use with
either the default interface or a VAP associated with this radio
–
Key Type specifies the preferred method of entering WEP encryption keys on the access
point and enter up to four keys:
‐
Hexadecimal: Enter keys as 10 hexadecimal digits (0 to 9 and A to F) for 64 bit keys, 26
hexadecimal digits for 128 bit keys, or 32 hexadecimal digits for 152 bit keys.
‐
Alphanumeric: Enter keys as 5 alphanumeric characters for 64 bit keys, 13
alphanumeric characters for 128 bit keys, or 16 alphanumeric characters for 152 bit
keys.
–
Key Len specifies whether to use 64, 128 or 152 bit keys.
–
Key: Specify a key in the appropriate format for the type of key type and length that you
selected.
Hexadecimal: 64‐bit enter a 10 digit key; 128‐bit enter a 26 digit key; 152‐bit enter a 32 digit
key.
Alphanumeric: 64‐bit enter a 5 character key; 128‐bit enter a 13 character key; 152‐bit enter
a 16 character key.
–
Transmit Key Select specifies the key number to use for encryption for the default interface
and each of the VAPs. If the clients have all four keys configured to the same values, you
can change the encryption key to any of the four settings without having to update the
client keys.
After completing the Static Key Settings, click default interface or any of the VAPs for which you
want to specify security settings.
The Security Settings page appears.
.
RoamAbout Access Point 3000 Configuration Guide 4-63
Security