Enterasys ROAMABOUT 3000 Configuration Manual page 216

Command Groups
Example
The following example shows setting 802.1x for the default interface and a VAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
Enter Wireless configuration commands, one per line.
RoamAbout 3000(if-wireless a)#802.1x supported
RoamAbout 3000(if-wireless a)#vap 1
RoamAbout 3000(if-wireless a: VAP[1])#802.1x supported
RoamAbout 3000(if-wireless a: VAP[1])#exit
RoamAbout 3000#
Related Commands
show interface wireless page A‐151
802.1x broadcast‐key‐refresh‐rate page A‐91
802.1x session‐key‐refresh‐rate page A‐92
802.1x session‐timeout page A‐93
radius‐server address page A‐82
radius‐server key page A‐82
radius‐server port page A‐83
radius‐server retransmit page A‐84
radius‐server timeout page A‐85
radius‐server timeout‐interim page A‐85
A-90