Table of Contents
Advertisement
Command Groups
cdp authentication
This command specifies an authentication key to use for Cabletron Discovery Protocol (CDP)
packets. Use the no form to remove an authentication key.
Syntax
cdp authentication <authentication code>
no cdp-authentication-code
authentication code a character string up to 16 bytes to use as an authentication key for CDP
packets.
Default Setting
None
Command Mode
Global Configuration
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#cdp authentication asdfg
RoamAbout 3000(config)#
Related Commands
cdp auto‐enable page A‐111
cdp enable page A‐113
A-110
Advertisement
Table of Contents
