Unicast-Cipher - Enterasys ROAMABOUT 3000 Configuration Manual

Command Groups
Example
The following example shows setting the multi‐cast cipher for the default interface and a VAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless a
RoamAbout 3000(if-wireless a)#multicast-cipher TKIP
RoamAbout 3000(if-wireless a)#vap 5
RoamAbout 3000(if-wireless a: VAP[5])#multicast-cipher AES
RoamAbout 3000(if-wireless a: VAP[5])#end
RoamAbout 3000(if-wireless a)#

unicast-cipher

This command
point and a client.
Syntax
unicast-cipher <AES | TKIP | WEP>
• AES ‐ Advanced Encryption Standard
• TKIP ‐ Temporal Key Integrity Protocol
• WEP ‐ Wired Equivalent Privacy
Default Setting
WEP
Command Mode
Interface Configuration (Wireless)
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#unicast-cipher TKIP
RoamAbout 3000(if-wireless g)#
A-144
defines the cipher algorithm used for communicating over a network between the access