Table of Contents
Advertisement
Command Groups
•
The command prompts for the following information to configure an SNMP v3 user:
–
–
–
–
–
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#snmp-server user
User Name<1-32>
Group Name<1-32>
md5(Auth) Passphrase<8-32>:davepass1
des(Priv) Passphrase<8-32>:davepass2
RoamAbout 3000(config)#
A-68
User Name is the user‐defined string for the SNMP user. (32 characters maximum)
Group Name is the name of the SNMP group to which the user is assigned (32 characters
maximum). There are three pre‐defined groups: RO, RWAuth, or RWPriv.
Authtype is the authentication type used for user authentication: "md5" or "none."
Passphrase is the user password required when authentication or data encryption is used
(8 – 32 characters).
Privacy is the encryption type used for SNMP data encryption: "des" or "none."
:dave
:RWPriv
Advertisement
Table of Contents
