Snmp-Server Trap; Snmp Trap Messages - Enterasys ROAMABOUT 3000 Configuration Manual

Command Groups

snmp-server trap

This command enables the access point to send specific SNMP traps (i.e., notifications). Use the no
form to disable specific trap messages.
Syntax
snmp-server trap <trap>
no snmp-server trap <trap>
trap is one of the SNMP trap messages listed in Table
Table A-10 SNMP Trap Messages
Message
dot11InterfaceAFail
dot11InterfaceGFail
dot11StationAssociation
dot11StationAuthentication
dot11StationReAssociation
dot11StationRequestFail
dot1xAuthFail
dot1xAuthNotInitiated
dot1xAuthSuccess
dot1xMacAddrAuthFai
dot1xMacAddrAuthSuccess
iappContextDataSent
iappStationRoamedFrom
iappStationRoamedTo
localMacAddrAuthFail
localMacAddrAuthSuccess
pppLogonFail
sntpServerFail
A-64
A‐10:
Description
The 802.11a interface failed
The 802.11g interface failed
A client station successfully associated with the access point
A client station was successfully authenticated
A client station was successfully re-associated with the
access point
A client station failed association, re-association, or
authentication
A 802.1x client station failed RADIUS authentication
A client station did not initiate 802.1x authentication
A 802.1x client station was successfully authenticated by the
RADIUS server
A client station failed MAC address authentication with the
RADIUS server
A client station successfully authenticated its MAC address
with the RADIUS server
A client station's Context Data was sent to another access
point with which the station has associated
A client station roamed from another access point (identified
by its IP address)
A client station roamed to another access point (identified by
its IP address)
A client station failed authentication with the local MAC
address database on the access point
A client station was successfully authenticated its MAC
address with the local database on the access point
The access point failed to log onto the PPPoE server using
the configured user name and password
The access point failed to set the time from the configured
SNTP server