Rogue-Ap Duration - Enterasys ROAMABOUT 3000 Configuration Manual

Command Groups

rogue-ap duration

This command sets amount of time to scan each frequency channel for the 802.11a or 802.11g
interface.
Syntax
rogue-ap [interface-a | interface-g] duration <time>
time is the duration in milliseconds.
Range: 100‐1000 milliseconds
Default Setting
350 milliseconds
Command Mode
Global Configuration
Command Usage
N/A
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#rogue-ap interface-a duration 400
RoamAbout 3000(config)#
Related Commands
rogue‐ap enable page A‐159
rogue‐ap interduration page A‐161
rogue‐ap interval page A‐162
A-160