Table of Contents
Advertisement
Command Groups
description
This command adds a description to a wireless interface. Use the no form to remove the
description.
Syntax
description <string>
no description
string is a comment or a description for this interface. Range: 1‐80 characters
Default Setting
None
Command Mode
Interface Configuration (Wireless)
Interface Configuration (Wireless): VAP
Command Usage
Use this command for the default interface or any of the seven VAPs configurable per radio
interface.
Example
The following example shows setting the description for the default interface and a VAP.
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#description RD-AP#3-G
RoamAbout 3000(if-wireless g)#vap 4
RoamAbout 3000(if-wireless g: VAP[4])#description RD-AP#3-GV4
RoamAbout 3000(if-wireless g: VAP[4])#end
RoamAbout 3000(if-wireless g)#
A-124
Advertisement
Table of Contents
