Using The Cli To Display Ap Status - Enterasys ROAMABOUT 3000 Configuration Manual

Status Information

Using the CLI to Display AP Status

To view the current access point system settings, use the show system command from the Exec
mode. To view the current radio interface settings, use the show interface wireless a or show
interface wireless g command.
.
4-80 Advanced Configuration
RoamAbout 3000#show system
ystem Information
====================================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code
Ethernet MAC Address : 00-01-F4-61-9C-08
802.11a MAC Address
802.11b/g MAC Address : Default=00-0C-DB-81-3D-CD VAP1=00-0C-DB-81-3D-CE
IP Address: 10.2.43.203
Subnet Mask
Default Gateway
Management VLAN State : ENABLED
Management VLAN ID(AP : 3
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
HTTPS Server
HTTPS Server Port
Slot Status
SSH Server
SSH Server Port
Telnet Server
Com Port
Software Version
====================================================================
RoamAbout 3000#
: 034830992141
: 0 days, 5 hours, 8 minutes, 42 seconds
: RoamAbout AP
:
:
: US - UNITED STATES
: Default=00-01-F4-61-9C-36
VAP2=00-01-F4-36-4C-36
VAP4=00-01-F4-36-6C-36
VAP6=00-01-F4-36-8C-36
VAP2=00-0C-DB-81-3D-CF
VAP4=00-0C-DB-81-3D-D1
VAP6=00-0C-DB-81-3D-D3
: 255.255.0.0
: 10.2.1.1
: ENABLED
: DISABLED
: ENABLED
: 80
: ENABLED
: 443
: Dual band(a/g)
: ENABLED
: 22
: ENABLED
: ENABLED
: V3.1.0
VAP1=00-01-F4-36-3C-36
VAP3=00-01-F4-36-5C-36
VAP5=00-01-F4-36-7C-36
VAP7=00-01-F4-36-9C-36
VAP3=00-0C-DB-81-3D-D0
VAP5=00-0C-DB-81-3D-D2
VAP7=00-0C-DB-81-3D-D4