Table of Contents
Advertisement
Command Groups
transmit-power
This command adjusts the power of the radio signals transmitted from the access point.
Syntax
transmit-power <signal-strength>
signal‐strength is the signal strength transmitted from the access point. (Options: full, half,
quarter, eighth, min)
Default Setting
full
Command Mode
Interface Configuration (Wireless)
Command Usage
• The "min" keyword indicates minimum power.
• The longer the transmission distance, the higher the transmission power required. But to
Example
RoamAbout 3000#configure
Enter configuration commands, one per line. End with CTRL/Z
RoamAbout 3000(config)#interface wireless g
RoamAbout 3000(if-wireless g)#transmit-power half
RoamAbout 3000(if-wireless g)#
A-140
support the maximum number of users in an area, you must keep the power as low as
possible.
Power selection is not just a trade off between coverage area and maximum supported
clients. You also have to ensure that high strength signals do not interfere with the
operation of other radio devices in your area.
Advertisement
Table of Contents
