Enabling Dhcp - Cisco 7960 Administration Manual

Modifying DHCP Settings

Enabling DHCP

Cisco IP Phone 7960/7940
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Cisco IP Phone 7910
Step 1
Step 2
Step 3
Step 4
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
5-10
Cisco IP Phones enable DHCP by default, but you can reset the protocol if it
becomes disabled.
Procedure
Press settings.
Use the Navigation button to select Network Configuration.
Press the Select soft key.
Scroll to DHCP Enabled.
If DHCP is disabled, the option displays as
DHCP Enabled NO
Press the Yes soft key to enable DHCP.
Press Save.
Procedure
Press settings.
Press 3 (Network Configuration).
Use the down volume key to select DHCP Enabled.
If DHCP is disabled, the option displays as
DHCP Enabled
NO
Press * to edit.
Chapter 5 Configuring Network Settings on the Cisco IP Phone
78-10453-04