Cisco 7960 Administration Manual page 105

Chapter 6 Configuring Cisco IP Phones, Users, and Features in Cisco CallManager
Table 6-1 Configuring Telephony Features Using Cisco CallManager (continued)
Feature
Caller ID
Conference
Extension Mobility
Forward
Group call pickup
Hold
Meet-Me conference
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Description
Displays number and name of caller
Initiates an ad hoc conference and then
conference in other participants one at a
time.
Enables users to sign into their
directory number from any Cisco IP
Phone
Forwards all calls to the designated
directory number
Allows users to pick up incoming calls
within their own group or in other
groups
Places an active call on hold
Enables other callers to join in a
conference
Configuring Cisco IP Phones in Cisco CallManager
Configuration Tips
From Cisco CallManager, choose:
Device > Phone to select outgoing
caller ID pattern and to select
whether to transmit or block caller ID
information.
From Cisco CallManager, choose:
Service > Media Resource >
Conference Bridge to configure
device to support conferences.
From Cisco CallManager, choose:
Device > Phone.
From Cisco CallManager, choose:
Device > Phone and select the
directory number to configure. You
can configure Forward All, Forward
Busy, or Forward No Answer.
Users can also designate the forward
numbers in the Cisco IP Phone
Configuration windows.
From Cisco CallManager, choose:
Feature > Call Pickup to configure.
From Cisco CallManager, choose:
Device > Phone and select the
directory number to assign a call
pickup group.
This feature requires no
configuration to work, unless you
want to use music on hold.
From Cisco CallManager, choose:
Service > Conference Bridge to
configure Meet-Me parameters.
6-3