Configuring Ip Network Settings; Enabling Dhcp - Cisco 7925G - Unified Wireless IP Phone VoIP Administration Manual

Chapter 4 Using the Cisco Unified Wireless IP Phone 7925G Web Pages
•
•
•
•
Enabling PEAP Authentication
To enable PEAP authentication on the phone, follow these steps:
Procedure
From the phone configuration web page, choose PEAP as the authentication mode. See
Step 1
Authentication Mode, page
Enter a user name and password.
Step 2

Configuring IP Network Settings

The Cisco Unified IP Phones enable DHCP, by default, to automatically assign IP addresses to devices
when you connect them to the network. If you do not use DHCP in your network, then you must disable
DHCP and manually enter network configuration information. For more information, see
with the Dynamic Host Configuration Protocol Server" section on page
When DHCP is disabled in the network, you must configure the following settings in the Static Settings
menu:
•
•
•
•
•
Use these guidelines when manually configuring the IP settings:
•
•

Enabling DHCP

To enable the use of DHCP in the Network Profile, follow these steps:
Procedure
Choose the network profile that you want to configure.
Step 1
Under the IP Network Configuration area, choose this option:
Step 2
Obtain IP address and DNS servers automatically
Cisco Unified Wireless IP Phone 7925G Administration Guide for Cisco Unified Communications Manager 7.0(1)
OL-15984-01
The ACS root certificate must be installed
Enable the Allow EAP-MSCHAPv2 setting
User account and password must be configured
For password authentication, you can use the local ACS database or an external one (such as
Windows or LDAP)
4-14.
IP address
Subnet mask
Default Router
DNS server 1 and 2
TFTP server 1
Ensure the TFTP server has an IP address.
Ensure the default router IP address is on the same subnet as the host IP address.
Configuring Network Profiles
Configuring the
"Interacting
2-15.
4-23