Cisco 7960 Administration Manual page 87

Chapter 5 Configuring Network Settings on the Cisco IP Phone
Step 5
Step 6
Cisco IP Phone 7910
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Press the Yes soft key to release the DHCP-assigned IP address.
Press Save.
The phone remains in an idle state, without an IP address assigned, until you do
one of the following actions:
Manually assign an IP address
•
Set DHCP Address Released back to No.
•
Power cycle the phone, which enables all default settings, including enabling
•
DHCP.
Procedure
Press settings.
Press 6 (Network Configuration).
Use the down volume key to select DHCP Address Released.
If the DHCP address is currently assigned, the option displays as
DHCP Address Released
NO
Press * to edit.
Use the down volume key to select Yes.
Press # to save.
The phone remains in an idle state, without an IP address assigned, until you do
one of the following actions:
Manually assign an IP address.
•
Set DHCP Address Released back to No.
•
Power cycle the phone, which enables all default settings, including enabling
•
DHCP.
Modifying DHCP Settings
5-13