Installing the 7914 Expansion Module
Connecting the Footstand
Step 1
Step 2
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
4-12
Figure 4-7
Power Supply Connector Port
1
Power supply connector plugged in to the power supply
port on the back of the Expansion Module
To connect the footstand to the support bar, follow these steps.
Procedure
Locate the three hooks on the footstand.
Position the hooks so that they align with the two open slots on the support bar.
Chapter 4
Adding the Cisco IP Phone 7914 Expansion Module
78-10453-04