Configuring Ip Network Settings; Enabling Dhcp - Cisco 7921G - Unified Wireless IP Phone VoIP Administration Manual

For cisco unified communications manager 7.0
Hide thumbs Also See for 7921G - Unified Wireless IP Phone VoIP:
Table of Contents

Advertisement

Chapter 4
Using the Cisco Unified Wireless IP Phone 7921G Web Pages
Step 2
In the Certificate Options section, choose True in the Validate Server Certificate subsection. Another
window displays with available certificates. The displayed fields are Type, Common Name, Issuer
Name, Valid From and Valid To. You can install, export, or import certificates as required. If you are
importing a certificate to the phone, you can browse the server for the file.
Step 3
If you choose EAP-TLS authentication, the User Certificate Installation page displays. You only have
to enter the Common Name field in the first step to use EAP-TLS. There are four steps to complete the
EAP-TLS User Certificate Installation. Click Submit when done.

Configuring IP Network Settings

The Cisco Unified IP Phones enable DHCP, by default, to automatically assign IP addresses to devices
when you connect them to the network. If you do not use DHCP in your network, then you must disable
DHCP and manually enter network configuration information. For more information, see
with the DHCP Server" section on page
When DHCP is disabled in the network, you must configure the following settings in the Static Settings
menu:
Use these guidelines when manually configuring the IP settings:

Enabling DHCP

To enable the use of DHCP in the Network Profile, follow these steps:
Procedure
Choose the network profile that you want to configure.
Step 1
Under the IP Network Configuration area, choose this option:
Step 2
Obtain IP address and DNS servers automatically
Click Save to make the change.
Step 3
Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0
OL-15985-01
IP address
Subnet mask
Default Router
DNS server 1 and 2
TFTP server 1
Ensure the TFTP server has an IP address.
Ensure the default router IP address is on the same subnet as the host IP address.
2-13.
Configuring Network Profiles
"Interacting
4-25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp-7921g-a-k9

Table of Contents