Cisco 7960 Administration Manual page 81

Chapter 5 Configuring Network Settings on the Cisco IP Phone
Table 5-1 Network Settings (continued)
Network Setting
Forwarding Delay
Idle URL
Idle URL Time
Authentication URL
Proxy Server URL
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Description
Indicates whether the internal switch
begins forwarding packets between the
PC port and switch (SW) port on your
phone when your the PC port becomes
active.
Specifies the URL that the phone
displays when the phone has not been
used for the time specified in Idle URL
Timer setting. For example, your
administrator can display a logo on the
LCD when the phone has not been used
for 5 minutes.
Displays the amount of time (in
seconds) that elapses before the URL
specified in the Idle URL setting
displays.
Displays the URL that the phone uses to
validate requests made to the phone web
server.
Specifies the host and port used to proxy
HTTP requests for access to non-local
host addresses from the phone HTTP
client.
Verifying Network Settings
Usage Notes
Displays Yes or No.
When set to No, the internal
switch begins forwarding packets
immediately. When set to Yes, the
internal switch waits 8 seconds
before forwarding packets
between the PC Port and the SW
Port.
Set the Forwarding Delay to Yes
if you connect both ports to
switches for redundant uplinks or
daisy chain phones together.
Cannot configure locally. Use
Cisco CallManager to modify.
Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
Available only on the
Cisco IP Phone 7960/7940.
Cannot configure locally. Use
Cisco CallManager to modify.
5-7