Configuring Ip Settings; Assigning An Ip Address - Cisco 7960 Administration Manual

Configuring IP Settings

Configuring IP Settings

Note

Assigning an IP Address

Cisco IP Phone 7960/7940
Step 1
Step 2
Step 3
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
5-14
Use these guidelines when manually configuring the IP settings:
• You can use 0.0.0.0 for the subnet mask only if the default gateway is also
0.0.0.0.
• Ensure TFTP server has an IP address.
Ensure the default gateway IP address is on the same subnet as the host IP
•
address.
Procedures involved in configuring IP settings or TFTP options cannot be
completed when DHCP is enabled in your network.
This section covers the following topics:
• Assigning an IP Address, page 5-14
Assigning Default Router, page 5-15
•
Assigning Subnet Mask, page 5-17
•
Assigning Domain Name, page 5-18
•
Assigning DNS Servers, page 5-19
•
The IP address is the unique logical address identifying each host computer, or
node, on a TCP/IP network. An IP address is a 32-bit number expressed as four
decimal numbers from 0 to 255 separated by periods.
Procedure
Press settings.
Use the Navigation button to select Network Configuration.
Press the Select soft key.
Chapter 5 Configuring Network Settings on the Cisco IP Phone
78-10453-04