Cisco 7960 Administration Manual page 33

Chapter 1 An Overview of the Cisco IP Phone
Table 1-2 Overview of Configuration Procedures for the Cisco IP Phone (continued)
Required Task
Add the phone to
3.
Cisco CallManager.
Choose to auto-register phones,
4.
add them to the Cisco CallManager
database manually, or use Bulk
Administration (BAT) to add many
phones to the database
simultaneously.
Choose to power through the
5.
Cisco AC adapter or
Cisco Catalyst switch.
6. Install the phone in the network.
Add a 7914 Expansion Module.
7.
8. Configure network settings on the
Cisco IP Phone 7960.
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Understanding the Requirements for Installing and Configuring the Cisco IP Phone
Purpose
Provides call processing in the
IP telephony network.
Determines how the phone is
added to Cisco CallManager
and how the directory number
is assigned.
Determines whether the phone
receives power from an
external power source over a
power cord or from the in-line
power source over the
Ethernet cable.
Adds the phone to the
network.
Extends functionality to the
Cisco IP Phone 7960 by
adding 14 line appearances
and/or speed dial numbers.
Sets IP settings (if not using
DHCP in the network) and
assigns a TFTP server.
For More Information
See the "Adding Phones to
the Cisco CallManager
Database" section on
page 2-10 and the
Cisco CallManager
Administration Guide.
See the "Adding Phones to
the Cisco CallManager
Database" section on
page 2-10 and the
Cisco CallManager
Administration Guide.
See the "Providing Power to
the Cisco IP Phone" section
on page 2-7 or the
documentation included
with the Cisco Catalyst
switch.
See Chapter 3, "Installing
the Cisco IP Phone".
See the "Adding the
Cisco IP Phone 7914
Expansion Module" section
on page 4-1.
See the "Configuring IP
Settings" section on
page 5-14 and the
"Configuring TFTP
Options" section on
page 5-21.
1-13