Configuring The Sw Port - Cisco 7960 Administration Manual

Configuring Ports

Configuring the SW Port

Cisco IP Phone 7960/7940
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
5-26
This section covers the following topics:
Configuring the SW Port, page 5-26
•
Configuring the PC Port, page 5-27
•
Follow these procedures to set the speed of the switch port on the Cisco IP Phone.
Procedure
Press the Settings button.
Use the Navigation button to select Network Configuration.
Press the Select soft key.
Scroll to SW Port Configuration.
Press the Edit soft key.
Use the buttons on the dial pad to enter the selected option.
To enter letters, use the numbers associated with a particular letter. For example,
the 2 key has the letters ABC. For a lower case "a," press 2 once. Press the 2 key
repeatedly to scroll through the available letters and numbers. Pause after the
selected letter appears on the screen.
Valid values are as follows:
• A (auto negotiate)
10H (10basedT/half duplex)
•
10F (10basedT/full duplex)
•
100H (100basedT/half duplex)
•
100F (100basedT/full duplex)
•
Use the << soft key to correct any mistakes.
Chapter 5 Configuring Network Settings on the Cisco IP Phone
78-10453-04