Cisco 7960 Administration Manual page 48

Adding Phones to the Cisco CallManager Database
Procedure
Log in to the Cisco CallManager Administration application.
Step 1
From the menu bar, choose Device > Add a New Device.
Step 2
The Add a New Device window appears.
Select Phone from the Device Type drop-down menu and click Next.
Step 3
The Add a New Phone window appears.
Select a phone type from the drop-down menu and click Next.
Step 4
The Phone Configuration window appears. The fields displayed in this window
depend upon the phone type selected.
Step 5 In the Phone Configuration window, you must enter information in the following
three fields:
•
•
•
Click Insert.
Step 6
The Cisco CallManager Administration application asks if you want to assign a
directory number.
Enter the required fields.
Step 7
Install the phone by following the instructions in the
Step 8
Cisco IP Phone."
Configure the IP settings by following the instructions in the
Step 9
Settings" section on page
Configure the TFTP server by following the instructions in the
Step 10
TFTP Options" section on page
To configure additional phone features, see the
Step 11
Cisco CallManager" section on page 6-2
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
2-14
Chapter 2
MAC Address
Device Pool
Phone Button Template
5-14.
Preparing to Install the Cisco IP Phone on Your Network
Chapter 3, "Installing the
5-21.
"Configuring Cisco IP Phones in
for details.
"Configuring IP
"Configuring
78-10453-04