Adding Phones Manually; Adding Phones Manually Using Dhcp - Cisco 7960 Administration Manual

Ip phone administration guide for cisco callmanager 3.2
Hide thumbs Also See for 7960:
Table of Contents

Advertisement

Adding Phones to the Cisco CallManager Database
Step 4
Step 5
Step 6

Adding Phones Manually

Adding Phones Manually Using DHCP

Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
2-12
To modify phone settings, choose Device > Phone. Use the Find and List Phones
window to enter search criteria for each phone.
Install the phone by following the instructions in
Cisco IP Phone."
To configure additional phone features, see the
Cisco CallManager" section on page 6-2
If you want to assign specific directory numbers to a specific Cisco IP Phone
without using auto-registration, you can manually add each phone to the
Cisco CallManager database or use the Bulk Administration Tool (BAT).
If you want to add phones manually, and are not using Dynamic Host
Configuration Protocol (DHCP) in your network, then you must configure the IP
settings and Trivial File Transfer Protocol (TFTP) server locally on each phone.
Alternatively, if you use DHCP, but want to manually set the TFTP server, then
allow the phone to start up, using DHCP, before re-assigning the TFTP server.
Refer to these topics for more information:
Adding Phones Manually Using DHCP, page 2-12
Assigning Static IP Addresses, page 2-13
If you are using DHCP in your network, but you are not using auto-registration,
you can manually add a phone to the Cisco CallManager database. If you are
using DHCP, you do not need to assign IP addresses or TFTP servers.
Use the following procedure as a starting point to add phones manually using the
Cisco CallManager Administration application.
Chapter 2
Preparing to Install the Cisco IP Phone on Your Network
for details.
Chapter 3, "Installing the
"Configuring Cisco IP Phones in
78-10453-04

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7910Cisco 7940

Table of Contents