Cisco 7960 Administration Manual page 102

Configuring Ports
Step 6
Step 7
Step 8
Step 9
Cisco IP Phone 7910
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
5-28
Use the buttons on the dial pad to enter the selected option.
To enter letters, use the numbers associated with a particular letter. For example,
the 2 key has the letters ABC. For a lower case "a," press 2 once. Press the 2 key
repeatedly to scroll through the available letters and numbers. Pause after the
selected letter appears on the screen.
Valid values are as follows:
A (auto negotiate)
•
• 10H (10basedT/half duplex)
10F (10basedT/full duplex)
•
100H (100basedT/half duplex)
•
100F (100basedT/full duplex)
•
Use the << soft key to correct any mistakes.
Press the Validate soft key.
Press the Save soft key to save this change.
Procedure
Press the Settings button.
Press 6 to select Network Configuration.
Scroll (using the volume up/down keys) to PC Port Configuration.
Press * to enter edit mode.
Press the volume down button to scroll down through options.
Options are AUTO, 10HALF, 10FULL, 100HALF, and 100FULL.
Select an option, then press the volume up button to exit this menu.
Press # to save this change.
Chapter 5 Configuring Network Settings on the Cisco IP Phone
78-10453-04