Chapter 5
Configuring Network Settings on the Cisco IP Phone
Step 8
Step 9
Cisco IP Phone 7910
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Configuring the PC Port
Cisco IP Phone 7960/7940
Step 1
Step 2
Step 3
Step 4
Step 5
Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
78-10453-04
Press the Validate soft key.
Press the Save soft key to save this change.
Procedure
Press the Settings button.
Press 6 to select Network Configuration.
Scroll (using the volume up/down keys) to SW Port Configuration.
Press * to enter edit mode.
Press the volume down button to scroll down through options.
Options are AUTO, 10HALF, 10FULL, 100HALF, and 100FULL.
Select an option, then press the volume up button to exit this menu.
Press # to save this change.
Follow these procedures to set the speed of the PC port on the Cisco IP Phone.
Procedure
Press the Settings button.
Use the Navigation button to select Network Configuration.
Press the Select soft key.
Scroll to PC Port Configuration.
Press the Edit soft key.
Configuring Ports
5-27