Removing The System Battery - IBM System x3530 M4 Installation And Service Manual

4. Remove the air baffle (see "Removing the air baffle" on page 365).
5. Inside the server, connect the cable to the rear of the operator information panel
6. Reinstall the air baffle (see "Replacing the air baffle" on page 66).
7. Install the cover (see "Replacing the server top cover" on page 67).
8. Reconnect the power cords and any cables that you removed.
9. Turn on the peripheral devices and the server.

Removing the system battery

The following notes describe information that you must consider when replacing
the battery:
v IBM has designed this product with your safety in mind. The lithium battery
v If you replace the original lithium battery with a heavy-metal battery or a
v To order replacement batteries, call 1-800-IBM-SERV within the United States,
332
System x3530 M4 Type 7160: Installation and Service Guide
assembly.
must be handled correctly to avoid possible danger. If you replace the battery,
you must adhere to the following instructions.
Note: In the U. S., call 1-800-IBM-4333 for information about battery disposal.
battery with heavy-metal components, be aware of the following environmental
consideration. Batteries and accumulators that contain heavy metals must not be
disposed of with normal domestic waste. They will be taken back free of charge
by the manufacturer, distributor, or representative, to be recycled or disposed of
in a proper manner.
and 1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your support center or business partner.