Modifying And Saving Parameters; Figure 3-9: Editing Symbol After Modifying Parameter Value - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
3.3.3.3

Modifying and Saving Parameters

When you change parameter values on a page, the Edit
these parameters. This is especially useful for indicating the parameters that you have
currently modified (before applying the changes). After you save your parameter
modifications (refer to the procedure described below), the Edit symbols disappear.

Figure 3-9: Editing Symbol after Modifying Parameter Value

To save configuration changes on a page to the device's volatile
memory (RAM), take this step:
Click the Submit
you are working; modifications to parameters with on-the-fly capabilities are
immediately applied to the device and take effect; other parameters (displayed on the
page with the lightning
reset (refer to ''Resetting the Device'' on page 207) before taking effect.
Notes:
Version 5.6
button, which is located near the bottom of the page in which
symbol) are not changeable on-the-fly and require a device
•
Parameters saved to the volatile memory (by clicking Submit), revert to
their previous settings after a hardware or software reset (or if the device
is powered down). Therefore, to ensure parameter changes (whether on-
the-fly or not) are retained, you need to save ('burn') them to the device's
non-volatile memory, i.e., flash (refer to ''Saving Configuration'' on page
209).
•
If you modify a parameter value and then attempt to navigate away from
the page without clicking Submit, a message box appears notifying you
of this. Click Yes to save your modifications or No to ignore them.
31
3. Web-Based Management
symbol appears to the right of
November 2008