Security Settings - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
Parameter
Media Security Behavior
[MediaSecurityBehaviour]
Disable Authentication On
Transmitted RTP Packets
[RTPAuthenticationDisableTx]
Disable Encryption On
Transmitted RTP Packets
[RTPEncryptionDisableTx]
Disable Encryption On
Transmitted RTCP Packets
[RTCPEncryptionDisableTx]
SRTP Settings
Master Key Identifier (MKI) Size
[SRTPTxPacketMKISize]
3.4.3

Security Settings

The Security Settings menu allows you to configure various security settings. This menu
contains the following page items:
Web User Accounts (refer to ''Configuring the Web User Accounts'' on page 80)
Web & Telnet Access List (refer to ''Configuring the Web and Telnet Access List'' on
page 82)
Firewall Settings (refer to ''Configuring the Firewall Settings'' on page 84)
Certificates (refer to ''Configuring the Certificates'' on page 86)
General Security Settings (refer to ''Configuring the General Security Settings'' on
page 90)
IPSec Table (refer to ''Configuring the IPSec Table'' on page 94)
IKE Table (refer to ''Configuring the IKE Table'' on page 97)
Version 5.6
MP-118: 6 available channels
MP-114: 3 available channels
MP-112: No reduction
Determines the device's mode of operation when SRTP is used
(EnableMediaSecurity = 1).
[0] Preferable = The device initiates encrypted calls. If
negotiation of the cipher suite fails, an unencrypted call is
established. Incoming calls that don't include encryption
information are accepted.
[1] Mandatory = The device initiates encrypted calls, but if
negotiation of the cipher suite fails, the call is terminated.
Incoming calls that don't include encryption information are
rejected (default).
On a secured RTP session, this parameter determines whether
to enable Authentication on transmitted RTP packets.
[0] Enable (default)
[1] Disable
On a secured RTP session, this parameter determines whether
to enable Encryption on transmitted RTP packets.
[0] Enable (default)
[1] Disable
On a secured RTP session, this parameter determines whether
to enable Encryption on transmitted RTCP packets.
[0] Enable (default)
[1] Disable
Determines the size (in bytes) of the Master Key Identifier (MKI)
in SRTP Tx packets.
The range is 0 to 4. The default value is 0.
79
3. Web-Based Management
Description
November 2008