The figure below illustrates a typical MediaPack VoIP application.
1.2
MediaPack Features
This section provides a high-level overview of some of the many device supported features.
For more updated information on the device's supported features, refer to the latest MP-11x
& MP-124 SIP Release Notes.
1.2.1
MP-11x Hardware Features
The MP-11x series hardware features include the following:
Combined FXS / FXO devices (four FXS and four FXO ports on the MP-118; two FXS
and two FXO ports on the MP-114).
MP-11x compact, rugged enclosure -- only one-half of a 19-inch rack unit, 1 U high.
Lifeline - provides a wired phone connection to the PSTN line that becomes active
upon a power or network failure (combined FXS/FXO devices provide a Lifeline
connection that's available on all FXS ports).
LEDs on the front panel that provide information on the device's operating status and
the network interface.
Reset button on the rear panel for restarting the MP-11x and for restoring the MP-11x
parameters to their factory default settings.
SIP User's Manual
Figure 1-1: Typical MediaPack VoIP Application
16
MediaPack Series
Document #: LTRT-65411