3.3.5.2
Accessing a Scenario
Once you have created the Scenario, you can access it at anytime by following the
procedure below:
To access the Scenario, take these 2 steps:
On the Navigation bar, select the Scenario tab; a message box appears, requesting
1.
you to confirm the loading of the Scenario.
Click OK; the Scenario and its Steps appear in the Navigation tree, as shown in the
2.
example figure below:
When you select a Scenario Step, the corresponding page is displayed in the Work pane. In
each page, the available parameters are indicated by a dark-blue background; the
unavailable parameters are indicated by a gray or light-blue background.
To navigate between Scenario Steps, you can perform one of the following:
In the Navigation tree, click the required Scenario Step.
SIP User's Manual
Figure 3-16: Scenario Loading Message Box
Figure 3-17: Scenario Example
38
MediaPack Series
Document #: LTRT-65411