Table 3-35: Keypad Features Parameters Description - AudioCodes MediaPack MP-124 User Manual

Table 3-35: Keypad Features Parameters Description

Parameter
Forward (Note: The forward type and number can be viewed in the 'Call Forward' table - refer to ''Call
Forward'' on page 178.)
Unconditional
[KeyCFUnCond]
No Answer
[KeyCFNoAnswer]
On Busy
[KeyCFBusy]
On Busy or No Answer
[KeyCFBusyOrNoAnswer]
Do Not Disturb
[KeyCFDoNotDisturb]
To activate the required forward method from the telephone:
1. Dial the preconfigured sequence number on the keypad; a dial tone is heard.
2. Dial the telephone number to which the call is forwarded (terminate the number with #); a
confirmation tone is heard.
Deactivate
[KeyCFDeact]
Caller ID Restriction (Note: The caller ID presentation can be viewed in the 'Caller Display
Information' table - refer to ''Caller ID'' on page 177.)
Activate
[KeyCLIR]
Deactivate
[KeyCLIRDeact]
Hotline (Note: The destination phone number and the auto dial status can be viewed in the
'Automatic Dialing' table - refer to ''Automatic Dialing'' on page 175.)
Activate
[KeyHotLine]
Deactivate
[KeyHotLineDeact]
Transfer
Blind
[KeyBlindTransfer]
SIP User's Manual
Keypad sequence that activates the immediate call forward option.
Keypad sequence that activates the forward on no answer option.
Keypad sequence that activates the forward on busy option.
Keypad sequence that activates the forward on 'busy or no answer'
option.
Keypad sequence that activates the Do Not Disturb option
(immediately reject incoming calls).
Keypad sequence that deactivates any of the call forward options.
After the sequence is pressed, a confirmation tone is heard.
Keypad sequence that activates the restricted Caller ID option. After
the sequence is pressed, a confirmation tone is heard.
Keypad sequence that deactivates the restricted Caller ID option. After
the sequence is pressed, a confirmation tone is heard.
Keypad sequence that activates the delayed hotline option.
To activate the delayed hotline option from the telephone, perform the
following:
Dial the preconfigured sequence number on the keypad; a dial tone
is heard.
Dial the telephone number to which the phone automatically dials
after a configurable delay (terminate the number with #); a
confirmation tone is heard.
Keypad sequence that deactivates the delayed hotline option. After
the sequence is pressed, a confirmation tone is heard.
Keypad sequence that activates blind transfer for Tel-to-IP calls. There
are two possible scenarios:
Option 1: After this sequence is dialed, the current call is put on
hold (using Re-INVITE), a dial tone is played to the phone, and
then phone number collection starts.
Option 2: A Hook-Flash is pressed, the current call is put on hold, a
dial tone is played to the phone, and then digit collection starts.
After this sequence is identified, the device continues the collection
148
Description
Document #: LTRT-65411
MediaPack Series