Configuring The Web And Telnet Access List - AudioCodes MediaPack MP-124 User Manual

To change the password of an account, perform the following:
2.
In the field 'Current Password', enter the current password.
a.
In the fields 'New Password' and 'Confirm New Password', enter the new
b.
password (maximum of 19 case-sensitive characters).
Click Change Password; if you are currently logged into the Web interface with
c.
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new password.
Notes:
3.4.3.2

Configuring the Web and Telnet Access List

The 'Web & Telnet Access List' page is used to define up to ten IP addresses that are
permitted to access the device's Web and Telnet interfaces. Access from an undefined IP
address is denied. If no IP addresses are defined, this security feature is inactive and the
device can be accessed from any IP address.
The Web and Telnet Access List can also be defined using the ini file parameter
WebAccessList_x (refer to ''Web and Telnet Parameters'' on page 249).
SIP User's Manual
•
For security, it's recommended that you change the default user name
and password.
•
A Web user with access level 'Security Administrator' can change all
attributes of all the Web user accounts. Web users with an access level
other than 'Security Administrator' can only change their own password
and user name.
•
To reset the two Web user accounts' user names and passwords to
default, set the ini file parameter ResetWebPassword to 1.
•
To access the Web interface with a different account, click the Log off
button located on the toolbar, click any button or page item, and then re-
access the Web interface with a different user name and password.
•
You can set the entire Web interface to read-only (regardless of Web
user account's access level), by using the ini file parameter
DisableWebConfig (refer to ''Web and Telnet Parameters'' on page 249).
•
Access to the Web interface can be disabled, by setting the ini file
parameter DisableWebTask to 1. By default, access is enabled.
•
You can define additional Web user accounts using a RADIUS server
(refer to the Product Reference Manual).
•
For secured HTTP connection (HTTPS) (refer to the Product Reference
Manual).
82
MediaPack Series
Document #: LTRT-65411