Figure 3-72: Ip To Hunt Group Routing; Table 3-42: Ip To Hunt Group Routing Table Description - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
From the 'Routing Index' drop-down list, select the range of entries that you want to
2.
add.
Configure the table according to the table below.
3.
Click the Submit button to save your changes.
4.
To save the changes so they are available after a power failure, refer to ''Saving
5.
Configuration'' on page 209.

Table 3-42: IP to Hunt Group Routing Table Description

Parameter
IP to Tel Routing Mode
[RouteModeIP2Tel]
Dest. Host Prefix
[PstnPrefix_DestHostPrefix]
Source Host Prefix
[PstnPrefix_SrcHostPrefix]
Version 5.6
Figure 3-72: IP to Hunt Group Routing Page
Determines whether to route IP calls to the Hunt Group before or
after manipulation of destination number (configured in ''Configuring
the Number Manipulation Tables'' on page 151).
[0] Route calls before manipulation = IP-to-Tel calls are routed
before the number manipulation rules are applied (default).
[1] Route calls after manipulation = IP-to-Tel calls are routed
after the number manipulation rules are applied.
The request URI host name prefix of the incoming SIP INVITE
message. If this routing rule is not required, leave the field empty.
Note: For notations representing multiple numbers, refer to ''Dialing
Plan Notation'' on page 155. However, the asterisk (*) wildcard
cannot be used to depict any source host prefix.
The From URI host name prefix of the incoming SIP INVITE
message. If this routing rule is not required, leave the field empty..
Notes:
For notations representing multiple numbers, refer to ''Dialing
Plan Notation'' on page 155. However, the asterisk (*) wildcard
cannot be used to depict any source host prefix.
If the P-asserted-ID header is present in the incoming INVITE
message, then the parameter 'Source Host Prefix' is compared to
the P-Asserted-ID URI hostname and not to the From header.
165
3. Web-Based Management
Description
November 2008