Figure 3-101: Load Auxiliary Files - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
File Type
Prerecorded The dat PRT file enhances the device's capabilities of playing a wide range of
Tones telephone exchange tones that cannot be defined in the Call Progress Tones file.
User Info The User Information file maps PBX extensions to IP numbers. This file can be
used to represent PBX extensions as IP phones in the global 'IP world'.
To load an auxiliary file to the device using the Web interface, take
these 6 steps:
Open the 'Load Auxiliary Files' page (Management tab > Software Update menu >
1.
Load Auxiliary Files page item).
Click the Browse button corresponding to the file type that you want to load, navigate
2.
to the folder in which the file is located, and then click Open; the name and path of the
file appear in the field next to the Browse button.
Click the Load File button corresponding to the file you want to load.
3.
Repeat steps 2 through 3 for each file you want to load.
4.
To save the loaded auxiliary files to flash memory, refer to ''Saving Configuration'' on
5.
page 209.
To reset the device (if you have loaded a Call Progress Tones file), refer to ''Resetting
6.
the Device'' on page 207.
Version 5.6
Figure 3-101: Load Auxiliary Files Page
211
3. Web-Based Management
Description
November 2008