Figure 3-66: Keypad Features - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
3.4.4.2.5 Keypad Features
The 'Keypad Features' page (applicable only to FXS interfaces) enables you to activate and
deactivate the following features directly from the connected telephone's keypad:
Call Forward (refer to ''Call Forward'' on page 178)
Caller ID Restriction (refer to ''Caller ID'' on page 177)
Hotline (refer to ''Automatic Dialing'' on page 175)
Notes:
To configure the keypad features, take these 4 steps:
Open the 'Keypad Features' page (Configuration tab > Protocol Configuration
1.
menu > SIP Advanced Parameters submenu > Keypad Features page item).
Configure the Keypad Features according to the table below.
2.
Click the Submit button to save your changes.
3.
To save the changes to the flash memory, refer to ''Saving Configuration'' on page
4.
209.
Version 5.6
•
The 'Keypad Features' page is available only for FXS interfaces.
•
The method used by the device to collect dialed numbers is identical to
the method used during a regular call (i.e., max digits, interdigit timeout,
digit map, etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e.,
not deactivated after a call).
Figure 3-66: Keypad Features Page
147
3. Web-Based Management
November 2008