Toolbar; Figure 3-3: "Reset" Displayed On Toolbar; Table 3-1: Description Of Toolbar Buttons - AudioCodes MediaPack MP-124 User Manual

3.3.1

Toolbar

The toolbar provides command buttons for quick-and-easy access to frequently required
commands, as described in the table below:
Icon Button
Name
Submit
Device
Actions
Home
Log off
Note:
SIP User's Manual

Table 3-1: Description of Toolbar Buttons

Applies parameter settings to the device (refer to ''Saving
Configuration'' on page 209).
Note: This icon is grayed out when not applicable to the currently
opened page.
Saves parameter settings to flash memory (refer to ''Saving
Burn
Configuration'' on page 209).
Opens a drop-down menu list with frequently needed commands:
Load Configuration File: opens the 'Configuration File' page for
loading an ini file (refer to ''Backing Up and Restoring
Configuration'' on page 217).
Save Configuration File: opens the 'Configuration File' page for
saving the ini file to a PC (refer to ''Backing Up and Restoring
Configuration'' on page 217).
Reset: opens the 'Maintenance Actions' page for resetting the
device (refer to ''Resetting the Device'' on page 207).
Software Upgrade Wizard: opens the 'Software Upgrade Wizard'
page for upgrading the device's software (refer to ''Software
Upgrade Wizard'' on page 212).
Opens the 'Home' page (refer to ''Using the Home Page'' on page
48).
Opens the Online Help topic of the currently opened configuration
Help
page in the Work pane (refer to ''Getting Help'' on page 47).
Logs off a session with the Web interface (refer to ''Logging Off the
Web Interface'' on page 51).
If you modify parameters that take effect only after a device reset, after you
click the Submit button, the toolbar displays the word "Reset" (in red color),
as shown in the figure below. This is a reminder to later save ('burn') your
settings to flash memory and reset the device.

Figure 3-3: "Reset" Displayed on Toolbar

Description
24
MediaPack Series
Document #: LTRT-65411