Attaching The Ferrite Core; Checking The Image Quality - Canon iR2020 Series Service Manual

Chapter 2
5) Turn the paper trailing edge registration plate [1] to the left to remove it.
Re-attach it to fit to the size of the paper to be loaded.
6) Slide the paper size detection lever [1] to fit to the paper size.
7) Affix the cassette size label [1] to the paper size indication plate [2].
A4
[1]
8) Affix the caution sheet printed in an appropriate language.
2-6
[1]
F-2-25
[1]
F-2-26
[2]
F-2-27
[1]
9) Align the left, right, and leading edges of sheets and load the stack of paper
in the cassette. Make sure that the paper is below the claws of the cassette.
MEMO:
Inserting the cassette into the iR body with the inner plate locked into the cas-
sette will unlock the inner plate automatically. If the inner plate is not locked,
press the "PUSH DOWN" mark [1] on the inner plate to lock it into the cas-
sette and then load paper.
[2]
10) Holding the knob at the center of the cassette, insert the cassette in the iR
body until it stops.

2.2.5 Attaching the Ferrite Core

iR2016 / iR2020 / iR2016i / iR2020i
(iR2020/iR2016 only for North America, Latin America, and Asia)
1) Attach the ferrite core [1] to the USB cable [2].
To suppress noise, attach the ferrite core as close as possible to the USB port
of the iR body.

2.2.6 Checking the Image Quality

iR2016J / iR2016 / iR2020 / / iR2016i / iR2020i
1) Plug the power cord into the outlet, and then turn on the main power
F-2-28
[1]
F-2-29
[1]
[2]
F-2-30
0011-1523
0011-1075